An improved volumetric LBM boundary approach and its extension for sliding mesh simulation

dc.contributor.advisor Tom I-P. Shih
dc.contributor.advisor Hudong Chen
dc.contributor.author Li, Yanbing
dc.contributor.department Aerospace Engineering
dc.date 2018-08-11T05:32:05.000
dc.date.accessioned 2020-06-30T02:42:17Z
dc.date.available 2020-06-30T02:42:17Z
dc.date.copyright Sun Jan 01 00:00:00 UTC 2012
dc.date.embargo 2013-06-05
dc.date.issued 2011-01-01
dc.description.abstract <p>The lattice Boltzmann method (LBM) has been emerging as a promising alternative CFD approach for complex fluid flows. With LBM, no-slip/free-slip wall boundary conditions are implemented via straightforward particle bounce-back/specular reflections on a solid surface, thus enable the use of Cartesian grid for accurate boundary representation. For curved boundary that is commonly encountered with complex geometry, available point-wise based LBM extrapolation/interpolation boundary schemes can not guarantee the exact hydrodynamic flux conditions. To address this fundamental issue, a volumetric LBM boundary scheme was proposed in 1998, which ensures an exact treatment of hydrodynamic fluxes on solid surface and establishes a generic framework for realizing hydrodynamic boundary conditions on curved surface.</p> <p>This dissertation presents the development of an improved volumetric LBM boundary scheme. The basic idea is when reflecting (scattering) back the fluid particles from solid boundary, particles should be distributed in the affected volume according to local flow information rather than uniformly as in the original volumetric LBM boundary formulation. To realize this, a scattering correction procedure is formulated and added to the originally proposed volumetric LBM boundary scheme framework. In particular, the procedure redistributes the surface scattered particles based on local velocity variation. As a result, it reduces the solution dependence on actual boundary location/orientation with respect to the computational grid, demonstrates an improved order of accuracy for flow solutions with arbitrarily located boundary. Accuracy of this approach has been demonstrated on typical flow benchmark problems that involve curved boundaries. In the second part of this dissertation, the proposed volumetric LBM boundary scheme is extended to sliding-mesh interface condition for flow simulation involving rotating geometries. A volumetric LBM sliding-mesh interface scheme couples the flow solutions on both sides of sliding interface, and conserves the mass and momentum flux across it. Accuracy of this scheme is demonstrated by performing a LBM-sliding mesh simulation of flow past a rotating propeller.</p>
dc.format.mimetype application/pdf
dc.identifier archive/lib.dr.iastate.edu/etd/12380/
dc.identifier.articleid 3387
dc.identifier.contextkey 3437746
dc.identifier.doi https://doi.org/10.31274/etd-180810-2467
dc.identifier.s3bucket isulib-bepress-aws-west
dc.identifier.submissionpath etd/12380
dc.identifier.uri https://dr.lib.iastate.edu/handle/20.500.12876/26569
dc.language.iso en
dc.source.bitstream archive/lib.dr.iastate.edu/etd/12380/Li_iastate_0097E_12485.pdf|||Fri Jan 14 19:19:49 UTC 2022
dc.subject.disciplines Engineering
dc.subject.keywords Boundary Condition
dc.subject.keywords LBM
dc.subject.keywords Sliding Mesh
dc.title An improved volumetric LBM boundary approach and its extension for sliding mesh simulation
dc.type article
dc.type.genre dissertation
dspace.entity.type Publication
relation.isOrgUnitOfPublication 047b23ca-7bd7-4194-b084-c4181d33d95d
thesis.degree.level dissertation
thesis.degree.name Doctor of Philosophy
File
Original bundle
Now showing 1 - 1 of 1
Name:
Li_iastate_0097E_12485.pdf
Size:
5.43 MB
Format:
Adobe Portable Document Format
Description: