Effects of moisture damage on asphalt mixtures

No Thumbnail Available
Date
2020-07-30
Authors
Omar, Hend
Yusoff, Nur
Mubaraki, Muhammad
Major Professor
Advisor
Committee Member
Journal Title
Journal ISSN
Volume Title
Publisher
Authors
Person
Ceylan, Halil
Professor Professor
Research Projects
Organizational Units
Organizational Unit
Civil, Construction and Environmental Engineering

The Department of Civil, Construction, and Environmental Engineering seeks to apply knowledge of the laws, forces, and materials of nature to the construction, planning, design, and maintenance of public and private facilities. The Civil Engineering option focuses on transportation systems, bridges, roads, water systems and dams, pollution control, etc. The Construction Engineering option focuses on construction project engineering, design, management, etc.

History
The Department of Civil Engineering was founded in 1889. In 1987 it changed its name to the Department of Civil and Construction Engineering. In 2003 it changed its name to the Department of Civil, Construction and Environmental Engineering.

Dates of Existence
1889-present

Historical Names

  • Department of Civil Engineering (1889-1987)
  • Department of Civil and Construction Engineering (1987-2003)
  • Department of Civil, Construction and Environmental Engineering (2003–present)

Related Units

Journal Issue
Is Version Of
Versions
Series
Abstract
The reduction in the ability of bitumen to bond with the aggregate surface due to the infiltration of moisture has been recognised for years, and this deterioration phenomenon is called moisture damage. In general, the loss of bonding between bitumen and aggregate shortens the service life of the top layer of the pavement. Many investigations have been conducted to understand the mechanisms of moisture damage due to the loss of bonding strength between bitumen and aggregate and to find ways to improve and strengthen the bond to mitigate the effect of moisture. This paper reviews the extensive literature on the loss of bitumen-aggregate bonding strength due to moisture damage in asphalt mixtures. The general description of the theories and mechanisms that explain the effect of the thermodynamic, chemical, physical and mechanical characteristics of the bitumen and aggregate on the bonding phenomenon are discussed in this paper. In addition, the causes of and contributing factors to moisture damage and methods to improve the bond between bitumen and aggregates are also discussed. Moreover, a description of the test methods that can be used to evaluate moisture damage in poorly bonded and compacted mixtures are also presented. Special attention is given to a well-known method, known as the pull-off test, which has been successfully used to evaluate aggregate-binder bond strength, both for laboratory and in-situ tests. This includes the test methods, the factors that affect the bonding strength results and their correlation with other test method. A review of the failure mode of bitumen under the pull-off loading test is discussed in the final section of this paper.
Comments

This article is published as Omar, Hend Ali, Nur Izzi Md. Yusoff, Muhammad Mubaraki, and Halil Ceylan. "Effects of moisture damage on asphalt mixtures." Journal of Traffic and Transportation Engineering (English Edition) 7 (2020):600-628. DOI: 10.1016/j.jtte.2020.07.001. © 2020 Periodical Offices of Chang'an University. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Description
Keywords
Citation
DOI
Copyright
Wed Jan 01 00:00:00 UTC 2020
Collections