Effect of pore water pressure on mechanical performance of recycled aggregate concrete under triaxial compression

dc.contributor.author Li, Yunan
dc.contributor.author Zhao, Hanbing
dc.contributor.author Hu, Yong
dc.contributor.author Qu, Fulin
dc.contributor.author Zhu, Dunming
dc.contributor.author Wang, Kejin
dc.contributor.author Li, Wengui
dc.contributor.department Civil, Construction and Environmental Engineering
dc.date.accessioned 2023-12-18T16:42:11Z
dc.date.available 2023-12-18T16:42:11Z
dc.date.issued 2023-12-07
dc.description.abstract The pore water pressure in concrete can significantly increase due to volume compression. Recycled aggregate concrete (RAC) possesses a more complex microstructure compared to natural aggregate concrete (NAC). Understanding the porosity and micromechanical properties of RAC is crucial for analysing its failure mechanism under the influence of coupled confining pressure and pore water pressure. This study compares the constituent proportions and micromechanical properties of interfacial transition zones (ITZs) and the adjacent paste matrix in NAC and RAC. Compressive stress-strain curves were obtained for concrete under coupled confining pressure and pore water pressure. The results indicate that the newly formed ITZ, which bonds to old mortar, outperformed the one bonded to natural aggregate when considering the same water-cement ratio. Compressive strength, ductility, and maximum volumetric strain gradually increased with increasing confining pressure. However, when pore water pressure was removed, compressive strength decreased while elastic modulus improved. Due to the inferior microstructures of RAC compared to NAC, the supportive effect of pore water becomes more pronounced. This is evident in the gradual increase in peak strain with increased pore water pressure for the stress-strain curves of RAC (100 % replacement ratio). Finally, a failure criterion and stress-strain theoretical model considering pore water pressure are proposed, and satisfactory fitting results are obtained.
dc.description.comments This article is published as Li, Yunan, Hanbing Zhao, Yong Hu, Fulin Qu, Dunming Zhu, Kejin Wang, and Wengui Li. "Effect of pore water pressure on mechanical performance of recycled aggregate concrete under triaxial compression." Cement and Concrete Composites (2023): 105402. doi: https://doi.org/10.1016/j.cemconcomp.2023.105402. © 2023 The Authors. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
dc.identifier.uri https://dr.lib.iastate.edu/handle/20.500.12876/gwW7oNGw
dc.language.iso en
dc.publisher Elsevier
dc.source.uri https://doi.org/10.1016/j.cemconcomp.2023.105402 *
dc.subject.disciplines DegreeDisciplines::Engineering::Civil and Environmental Engineering::Construction Engineering and Management
dc.subject.keywords Recycled aggregate concrete (RAC)
dc.subject.keywords Interfacial transition zone (ITZ)
dc.subject.keywords Triaxial compression
dc.subject.keywords Pore water pressure
dc.subject.keywords Failure criterion
dc.subject.keywords stress-strain model
dc.title Effect of pore water pressure on mechanical performance of recycled aggregate concrete under triaxial compression
dc.type Article
dspace.entity.type Publication
relation.isAuthorOfPublication f9071b81-012f-4b6d-a040-9083bc33535c
relation.isOrgUnitOfPublication 933e9c94-323c-4da9-9e8e-861692825f91
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
8.78 MB
Adobe Portable Document Format