Effect of synthesis temperature on the phase formation of NiTiAlFeCr compositionally complex alloy thin films

dc.contributor.author Marshal, A.
dc.contributor.author Singh, Prashant
dc.contributor.author Music, D.
dc.contributor.author Wolff-Goodrich, S.
dc.contributor.author Evertz, S.
dc.contributor.author Schökel, A.
dc.contributor.author Johnson, Duane
dc.contributor.author Dehm, G.
dc.contributor.author Liebscher, C. H.
dc.contributor.author Schneider, J. M.
dc.contributor.department Ames Laboratory
dc.contributor.department Physics and Astronomy
dc.contributor.department Materials Science and Engineering
dc.contributor.department Chemical and Biological Engineering
dc.date 2020-11-12T18:59:14.000
dc.date.accessioned 2021-02-24T20:27:37Z
dc.date.available 2021-02-24T20:27:37Z
dc.date.embargo 2021-04-15
dc.date.issued 2020-04-15
dc.description.abstract <p>The synthesis temperature dependent phase formation of Ni10Ti10Al25Fe35Cr20 thin films is compared to a bulk processed sample of identical composition. The as-cast alloy exhibits a dual-phase microstructure which is composed of a disordered BCC phase and AlNiTi-based B2- and/or L21-ordered phase(s). Formation of the BCC phase as well as an ordered AlNi-based B2 phase is observed for a thin film synthesised at 500 °C (ratio of synthesis temperature of thin film to melting temperature of bulk alloy: T/Tm = 0.49), which is attributed to both surface and bulk diffusion mediated growth. Post deposition annealing at 900 °C (T/Tm = 0.75) of a thin film deposited without intentional heating results in the formation of NiAlTi-based B2 and/or L21-phase(s) similar to the bulk sample, which is attributed to bulk diffusion. Depositions conducted at room temperature without intentional substrate heating (T/Tm = 0.20) resulted in the formation of an X-ray amorphous phase, while a substrate temperature increase to 175 °C (T/Tm = 0.28) causes the formation of a BCC phase. Atom probe tomography of the thin films deposited without intentional substrate heating and at 175 °C indicates the formation of ∼5 nm and ∼10 nm FeAl-rich domains, respectively. This can be rationalized based on the activation energy for surface diffusion, as Ti and Ni exhibit 2.5 to 4 times larger activation energy barriers than Al, Fe and Cr. It is evident from the homologous temperature that the phase formation observed at 500 °C (T/Tm = 0.49) is a result of both surface and bulk diffusion. As the temperature is reduced, the formation of FeAl-rich domains can be understood based on the differences in activation energy for surface diffusion and is consistent with kinetically limited thin film growth.</p>
dc.identifier archive/lib.dr.iastate.edu/ameslab_manuscripts/759/
dc.identifier.articleid 1759
dc.identifier.contextkey 20146051
dc.identifier.s3bucket isulib-bepress-aws-west
dc.identifier.submissionpath ameslab_manuscripts/759
dc.identifier.uri https://dr.lib.iastate.edu/handle/20.500.12876/93202
dc.language.iso en
dc.relation.ispartofseries IS-J 10325
dc.source.uri https://lib.dr.iastate.edu/cgi/viewcontent.cgi?article=1374&context=mse_pubs
dc.subject.disciplines Materials Science and Engineering
dc.subject.disciplines Metallurgy
dc.subject.keywords Compositionally complex alloy
dc.subject.keywords Thin film
dc.subject.keywords Phase formation
dc.subject.keywords Atom probe tomography
dc.subject.keywords High energy X-ray diffraction
dc.subject.keywords Density functional theory
dc.title Effect of synthesis temperature on the phase formation of NiTiAlFeCr compositionally complex alloy thin films
dc.type article
dc.type.genre article
dspace.entity.type Publication
relation.isOrgUnitOfPublication 25913818-6714-4be5-89a6-f70c8facdf7e
relation.isOrgUnitOfPublication 4a05cd4d-8749-4cff-96b1-32eca381d930
relation.isOrgUnitOfPublication bf9f7e3e-25bd-44d3-b49c-ed98372dee5e
relation.isOrgUnitOfPublication 86545861-382c-4c15-8c52-eb8e9afe6b75
File
Collections