Low Compaction Energy Concrete for Improved Slipform Casting of Concrete Pavements

Date
2007-05-01
Authors
Wang, Kejin
Voigt, Thomas
Wang, Kejin
Shah, Surendra P.
Major Professor
Advisor
Committee Member
Journal Title
Journal ISSN
Volume Title
Publisher
American Concrete Institute
Altmetrics
Authors
Wang, Kejin
Person
Professor
Research Projects
Organizational Units
Journal Issue
Series
Department
Civil, Construction and Environmental Engineering
Abstract
The current practice in concrete pavement construction is to use low-slump concrete, which is processed by a slipform paving machine. Extensive vibration, introduced by equally spaced internal vibrators, is required for the concrete to reach proper consolidation. It has frequently been reported that malfunctioning internal vibrators cause over-consolidation of the concrete pavement and lead to premature cracking and durability problems. The research presented in this paper is focused on optimizing the consolidation properties and shape stability of fresh concrete mixtures so that the internal vibration may he eliminated during the slipform paving process. The experimental results have shown that it is possible to design a concrete mixture that can be consolidated without internal or external vibration and at the same time can maintain its slab shape at the end of a slipform paving process. This was achieved by selectively manipulating flowability, consolidation properties, and green strength of fresh concrete through the use of chemical admixtures or the addition of small amounts of fine materials.
Comments
This article is published as Pekmezci, Bekir Yilmaz, Thomas Voigt, Kejin Wang, and Surendra P. Shah. "Low Compaction Energy Concrete for Improved Slipform Casting of Concrete Pavements." Materials Journal 104, no. 3 (2007): 251-258. Copyright 2007 American Concrete Institute. Posted with permission.
Description
Keywords
pavement, slipform, slump
Citation
DOI
Collections