Flaw detection in a multi-material multi-layered composite: Using FEM and air-coupled UT

Date
2010-07-01
Authors
Livings, Richard
Dayal, Vinay
Dayal, Vinay
Barnard, Daniel
Hsu, David
Major Professor
Advisor
Committee Member
Journal Title
Journal ISSN
Volume Title
Publisher
Altmetrics
Authors
Research Projects
Organizational Units
Journal Issue
Series
Department
Center for Nondestructive Evaluation
Abstract

Ceramic tiles are the main ingredient of a multi‐layer multi‐material composite being considered for the modernization of tank armors. The high stiffness, low attenuation, and precise dimensions of these uniform tiles make them remarkable resonators when driven to vibrate. This study is aimed at modeling the vibration modes of the tiles and the composite lay‐up with finite element analysis and comparing the results with the resonance modes observed in air‐coupled ultrasonic excitation of the tiles and armor samples. Defects in the tile, during manufacturing and∕or after usage, are expected to change the resonance modes. The comparison of a pristine tile∕lay‐up and a defective tile∕lay‐up will thus be a quantitative damage metric. The understanding of the vibration behavior of the tile, both by itself and in the composite lay‐up, can provide useful guidance to the nondestructive evaluation of armor panels containing ceramic tiles.

Comments

Copyright 2011 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics.

This article appeared in AIP Conference Proceedings 1335 (2011): 942–949 and may be found at http://dx.doi.org/10.1063/1.3592039.

Description
Keywords
Citation
DOI
Source