Early work on the use of models in the determination of pod/inspection reliability in the US and UK

Date
2010-07-01
Authors
Thompson, R.
Thompson, R. Bruce
Journal Title
Journal ISSN
Volume Title
Publisher
Source URI
Altmetrics
Authors
Research Projects
Organizational Units
Journal Issue
Series
Abstract

Early demonstrations of the use of models in the U.S. and U.K. to assist in the determination of NDE reliability and probability of detection (POD), as dictated by the advent of damage tolerant design, will be reviewed. A major motivation in the U.S. was the adoption of POD as the primary metric for effectiveness of an inspection and the empirical observation that field and depot inspections were not adequate so support the desired structural integrity. In parallel, a series of round robin trials in Europe raised issues with the effectiveness of nuclear power plant inspections, and the resulting concerns became an important part of the “Public Inquiry” in the UK regarding the construction of the Sizewell B power plant. In each country, physics‐based models of the inspection process became an important part of the response. This paper describes these early developments in the use of models to assess inspection reliability, contrasts the philosophies and approaches taken, and notes how these provide the origins of NDE simulation activities today.

Description
<p>Copyright 2011 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics.</p> <p>This article appeared in <em>AIP Conference Proceedings </em>1335 (2011): 1581–1588 and may be found at <a href="http://link.aip.org/link/doi/10.1063/1.3592118">http://dx.doi.org/10.1063/1.3592118</a>.</p>
Keywords
simulation, fracture mechanics, ultrasonic scattering, wave propagation, nondestructive evaluation, QNDE, Materials Science and Engineering, Aerospace Engineering
Citation