The Effect of Crack Closure on Heat Generation on Vibrothermography

Date
2008-07-01
Authors
Holland, Stephen
Renshaw, Jeremy
Holland, Stephen
Thompson, R. Bruce
Thompson, R.
Uhl, Christopher
Journal Title
Journal ISSN
Volume Title
Publisher
Source URI
Altmetrics
Research Projects
Organizational Units
Aerospace Engineering
Organizational Unit
Journal Issue
Series
Abstract

Vibrothermography is a nondestructive evaluation (NDE) technique that has shown great promise in detecting tight cracks that can often be missed using other NDE methods. Vibration applied to a structure containing cracks forces crack faces to rub together and generates frictional heat imaged with an infrared camera. The closure state of a crack controls the locations and magnitude of heat generation in a vibrated crack. Noncontacting regions of cracks and regions under large closure stresses generally do not rub together to generate heat. Heat is generated at contacting regions of crack faces under low closure stresses. Regions along a crack that generate heat can be modulated based on externally applied stresses. The closure state of a crack, the level of applied vibration, and externally applied stresses influence the regions of a crack that will generate heat and those that will not. Due to the nature of the heat generation process, some cracks that are not detectable using other NDE methods are readily detectable using Vibrothermography.

Description
<p>Copyright 2009 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics.</p> <p>This article appeared in <em>AIP Conference Proceedings</em>, 1096 (2009): 473–480 and may be found at <a href="http://link.aip.org/link/doi/10.1063/1.3114289?ver=pdfcov" target="_blank">http://dx.doi.org/10.1063/1.3114289</a>.</p>
Keywords
infrared imaging, crack detection, nondestructive testing, nondestructive evaluation, QNDE
Citation