Numerical analysis of aerodynamic noise mitigation via leading edge serrations for a rod–airfoil configuration

Thumbnail Image
Date
2016-01-01
Authors
Agrawal, Bharat
Sharma, Anupam
Major Professor
Advisor
Committee Member
Journal Title
Journal ISSN
Volume Title
Publisher
Authors
Person
Sharma, Anupam
Associate Professor
Research Projects
Organizational Units
Organizational Unit
Journal Issue
Is Version Of
Versions
Series
Department
Aerospace Engineering
Abstract

Noise produced by aerodynamic interaction between a circular cylinder (rod) and an airfoil in a tandem arrangement is investigated numerically using incompressible large eddy simulations. Quasi-periodic shedding from the rod and the resulting wake impinges on the airfoil to produce unsteady loads on the two geometries. These unsteady loads act as sources of aerodynamic sound and the sound radiates to the far-field with a dipole directivity. The airfoil is set at zero angle of attack for the simulations and the Reynolds number based on the rod diameter is Red = 48 K. Comparisons with experimental measurements are made for (a) mean and root mean square surface pressure on the rod, (b) profiles of mean and root mean square streamwise velocity in the rod wake, (c) velocity spectra in the near field, and (d) far-field pressure spectra. Curle’s acoustic analogy is used with the airfoil surface pressure data from the simulations to predict the far-field sound. An improved correction based on observed spanwise coherence is used to account for the difference in span lengths between the experiments and the simulations. Good agreement with data is observed for the near-field aerodynamics and the far-field sound predictions. The straight leading edge airfoil is then replaced with a test airfoil with a serrated leading edge geometry while maintaining the mean chord. This new configuration is also analyzed numerically and found to give a substantial reduction in the far-field noise spectra in the mid- to high-frequency range. Source diagnostics show that the serrations reduce unsteady loading on the airfoil, reduce coherence along the span, and increase spanwise phase variation, all of which contribute to noise reduction.

Comments

This article is published as Agrawal, Bharat Raj, and Anupam Sharma. "Numerical analysis of aerodynamic noise mitigation via leading edge serrations for a rod–airfoil configuration." International Journal of Aeroacoustics 15, no. 8 (2016): 734-756. DOI: 10.1177/1475472X16672322. Published with permission.

Description
Keywords
Citation
DOI
Copyright
Fri Jan 01 00:00:00 UTC 2016
Collections