Limits to the Effect of Substrate Roughness or Smoothness on the Odd–Even Effect in Wetting Properties of n-Alkanethiolate Monolayers

Thumbnail Image
Supplemental Files
Chen, Jiahao
Wang, Zhengjia
Oyola-Reynoso, Stephanie
Gathiaka, Symon
Thuo, Martin
Major Professor
Committee Member
Journal Title
Journal ISSN
Volume Title
Research Projects
Organizational Units
Organizational Unit
Materials Science and Engineering
Materials engineers create new materials and improve existing materials. Everything is limited by the materials that are used to produce it. Materials engineers understand the relationship between the properties of a material and its internal structure — from the macro level down to the atomic level. The better the materials, the better the end result — it’s as simple as that.
Journal Issue
Is Version Of
Materials Science and EngineeringCenter for Bioplastics and Biocomposites

This study investigates the effect of roughness on interfacial properties of an n-alkanethiolate self-assembled monolayer (SAM) and uses hydrophobicity to demonstrate the existence of upper and lower limits. This article also sheds light on the origin of the previously unexplained gradual increase in contact angles with increases in the size of the molecule making the SAM. We prepared Au surfaces with a root-mean-square (RMS) roughness of ∼0.2–0.5 nm and compared the wetting properties of n-alkanethiolate (C10–C16) SAMs fabricated on these surfaces. Static contact angles, θs, formed between the SAM and water, diethylene glycol, and hexadecane showed an odd–even effect irrespective of the solvent properties. The average differences in subsequent SAME and SAMO are Δθs|n  – (n+1)| ≈ 1.7° (n = even) and Δθs|n – (n+1)| ≈ 3.1° (n = odd). A gradual increase in θs with increasing length of the molecule was observed, with values ranging from water 104.7–110.7° (overall Δθs = 6.0° while for the evens ΔθsE = 4.4° and odds ΔθsO = 3.5°) to diethylene glycol 72.9–80.4° (overall Δθs = 7.5° while for the evens ΔθsE = 2.9° and odds ΔθsO= 2.4°) and hexadecane 40.4–49.4° (overall Δθs = 9.0° while for the evens ΔθsE = 3.7° and odds ΔθsO = 2.1°). This article establishes that the gradual increase in θs with increasing molecular size in SAMs is due to asymmetry in the zigzag oscillation in the odd–even effect. Comparison of the magnitude and proportion differences in this asymmetry allows us to establish the reduction in interfacial dispersive forces, due to increasing SAM crystallinity with increasing molecular size, as the origin of this asymmetry. By comparing the dependence of θs on surface roughness we infer that (i) RMS roughness ≈ 1 nm is a theoretical limit beyond which the odd–even effect cannot be observed and (ii) on a hypothetically flat surface the maximum difference in hydrophobicity, as expressed in θs, is ∼3°.


Reprinted with permission from Chen, Jiahao, Zhengjia Wang, Stephanie Oyola-Reynoso, Symon M. Gathiaka, and Martin Thuo. "Limits to the effect of substrate roughness or smoothness on the odd–even effect in wetting properties of n-alkanethiolate monolayers." Langmuir 31, no. 25 (2015): 7047-7054,doi:10.1021/acs.langmuir.5b01662. Posted with permission.

Thu Jan 01 00:00:00 UTC 2015