In recent years, the process of diffusion bonding has found considerable usage in both the nuclear power and aerospace industries. This process requires the compression of mating surfaces at an elevated temperature for a given time. If optimum conditions of time, temperature, pressure and surface cleanliness are achieved, diffusion of material across the interface will occur, yielding interfacial mechanical properties identical to those of the bulk material. The use of insufficient bonding conditions may result in void formation, precipitation of undesired phases or lack of grain growth across the interface. The consequence will be an interface that is less than fully bonded, which will result in severe degradation of the mechanical properties. Applications of diffusion bonding to nuclear reactor fuel elements, helicopter rotor hubs, jet engine turbine blades, etc., thus make the ability to characterize the strength of these interfaces highly desirable.