Finite element simulation and experimental verification of ultrasonic non-destructive inspection of defects in additively manufactured materials

Date
2018-01-01
Authors
Taheri, Hossein
Koester, Lucas
Bigelow, Timothy
Bond, Leonard
Bond, Leonard
Major Professor
Advisor
Committee Member
Journal Title
Journal ISSN
Volume Title
Publisher
Altmetrics
Authors
Research Projects
Organizational Units
Aerospace Engineering
Organizational Unit
Mechanical Engineering
Organizational Unit
Journal Issue
Series
Department
Aerospace EngineeringMechanical EngineeringElectrical and Computer EngineeringElectrical and Computer Engineering
Abstract

Industrial applications of additively manufactured components are increasing quickly. Adequate quality control of the parts is necessary in ensuring safety when using these materials. Base material properties, surface conditions, as well as location and size of defects are some of the main targets for nondestructive evaluation of additively manufactured parts, and the problem of adequate characterization is compounded given the challenges of complex part geometry. Numerical modeling can allow the interplay of the various factors to be studied, which can lead to improved measurement design. This paper presents a finite element simulation verified by experimental results of ultrasonic waves scattering from flat bottom holes (FBH) in additive manufacturing materials. A focused beam immersion ultrasound transducer was used for both the modeling and simulations in the additive manufactured samples. The samples were SS17 4 PH steel samples made by laser sintering in a powder bed.

Comments

This proceeding may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This proceeding appeared in Taheri, Hossein, L. Koester, T. Bigelow, and Leonard J. Bond. "Finite element simulation and experimental verification of ultrasonic non-destructive inspection of defects in additively manufactured materials." AIP Conference Proceedings 1949, no. 1 (2018): 020011. DOI: 10.1063/1.5031508. Posted with permission.

Description
Keywords
Citation
DOI