Impacts of Anisotropic Porosity on Heat Transfer and Off-Gassing during Biomass Pyrolysis

Pecha, M. Brennan
Thornburg, Nicholas E.
Peterson, Chad A.
Crowley, Meagan F.
Gao, Xi
Lu, Liqiang
Wiggins, Gavin
Ciesielski, Peter N.
Major Professor
Committee Member
Journal Title
Journal ISSN
Volume Title
American Chemical Society
Research Projects
Organizational Units
Mechanical Engineering
Organizational Unit
Bioeconomy Institute
Organizational Unit
Journal Issue
Mechanical EngineeringAgricultural and Biosystems EngineeringChemical and Biological EngineeringBioeconomy Institute
The pore structure of biogenic materials imbues the ability to deliver water and nutrients through a plant from root to leaf. This anisotropic pore granularity can also play a significant role in processes such as biomass pyrolysis that are used to convert these materials into useful products like heat, fuel, and chemicals. Evolutions in modeling of biomass pyrolysis as well as imaging of pore structures allow for further insights into the concerted physics of phase change-induced off-gassing, heat transfer, and chemical reactions. In this work, we report a biomass single particle model which incorporates these physics to explore the impact of implementing anisotropic permeability and diffusivity on the conversion time and yields predicted for pyrolysis of oak and pine particles. Simulation results showed that anisotropic permeability impacts predicted conversion time more than 2 times when the Biot number is above 0.1 and pyrolysis numbers (Py1, Py2) are less than 20. Pore structure significantly impacts predicted pyrolytic conversion time (>8 times) when the Biot number is above 1 and the pyrolysis number is below 1, i.e., the “conduction controlled” regime. Therefore, these nondimensional numbers reflect that when internal heat conduction limits pyrolysis performance, internal pyrolysis off-gassing further retards effective heat transfer rates as a closely coupled phenomenon. Overall, this study highlights physically meaningful opportunities to improve particle-scale pyrolysis modeling and experimental validation relevant to a variety of feedstock identities and preparations, guiding the future design of pyrolyzers for efficient biomass conversion.
This article is published as Pecha, M. Brennan, Nicholas E. Thornburg, Chad A. Peterson, Meagan F. Crowley, Xi Gao, Liqiang Lu, Gavin Wiggins, Robert C. Brown, and Peter N. Ciesielski. "Impacts of Anisotropic Porosity on Heat Transfer and Off-Gassing during Biomass Pyrolysis." Energy & Fuels (2021). DOI: 10.1021/acs.energyfuels.1c02679. Works produced by employees of the U.S. Government as part of their official duties are not copyrighted within the U.S. The content of this document is not copyrighted.
pyrolysis, single particle model, permeability, diffusion, heat transfer