Kinematics as objective tools to evaluate lameness phases in multiparous sows

Abstract

<p>Lameness has been ranked as the third most common reason for culling sows, comprising 15% of the culls marketed in the U.S. Producers assess sow lameness using subjective evaluation, which have been shown to be variable in their application. Objective empirical tools to measure sow lameness on farm are required. Therefore, the purpose of this study were to evaluate the embedded force plate and the GAITFour gait analysis walkway system as objective assessment tools to discriminate between sound and lame phases in multiparous sows. Twenty-four mixed parity crossbred sows were anesthetized and injected with Amphotericin B in the distal interphalangeal joint of both claws of one hind hoof to induce transient lameness. Kinematic data was collected on D−1, D+1 and D+6 relative to induction (D0). For the embedded force plate, weight distributions on each hoof were collected. Gait analysis measures collected were stride time (defined as the time (s) between 2 successive footfalls by the same hoof), <em>stride length</em> (defined as the distance (cm) between 2 sequential footfalls from the same hoof),<em>maximum pressure</em> (defined as the greatest amount of weight (kg/cm²) placed on a single hoof) and <em>stance time</em> (defined as the duration of time (s) the sensors were activated by a hoof in a single stride). For the embedded microcomputer-based force plate system weight placed on the induced hoof decreased on D+1 when compared to D−1 (<em>P</em>® pressure mat gait analysis walkway system, s<em>tride time</em> increased on D+1 for all hooves, s<em>tride length</em> decreased on D+1 compared to D−1 and m<em>aximum pressure</em> placed on the induced hoof decreased on D+1 compared to baseline levels (<em>P</em>Stance time increased for all sound hooves on D+1 compared to D−1 (<em>P</em></p>