The occurrence of creep damage limits the lifetime of component that are exposed to stresses at temperatures higher than approximately half the melting temperature. Such conditions are generally met by a lot of structural components especially in power plants (pipes, turbines, etc.). According to conventional safety rules critical parts are usually exchanged long before any failure has to be expected. This procedure is based on statistics drawn from material tests by standardized methods rather than on the actual state of the component concerned. During the last years an increasing need can be stated to develop NDE methods for the detection of early damage stages in order to improve the reliability and safety of components. Basically, techniques are required which are sensitive to either small strains or, better, to small concentrations of micropores and microcracks, respectively. With regard to in-field applications, only replica techniques are used successfully for that purpose up to now [1,2]. These metallographic techniques are restricted to surfaces where appropriate spots have to be selected and to be prepared carefully. In this work the influence of creep damage on the ultrasonic velocity has been investigated on a representative high-temperature alloy for tube components, i. e., Alloy 800 H (X10 NiCrAlTi 32 20).